oxc/crates/oxc_parser/src/lexer/comment.rs

use super::{
    cold_branch,
    search::{byte_search, safe_byte_match_table, SafeByteMatchTable},
    source::SourcePosition,
    Kind, Lexer,
};
use crate::diagnostics;

use oxc_syntax::identifier::is_line_terminator;

use memchr::memmem::Finder;

// Irregular line breaks - '\u{2028}' (LS) and '\u{2029}' (PS)
const LS_OR_PS_FIRST: u8 = 0xE2;
const LS_BYTES_2_AND_3: [u8; 2] = [0x80, 0xA8];
const PS_BYTES_2_AND_3: [u8; 2] = [0x80, 0xA9];

static LINE_BREAK_TABLE: SafeByteMatchTable =
    safe_byte_match_table!(|b| matches!(b, b'\r' | b'\n' | LS_OR_PS_FIRST));

static MULTILINE_COMMENT_START_TABLE: SafeByteMatchTable =
    safe_byte_match_table!(|b| matches!(b, b'*' | b'\r' | b'\n' | LS_OR_PS_FIRST));

impl<'a> Lexer<'a> {
    /// Section 12.4 Single Line Comment
    pub(super) fn skip_single_line_comment(&mut self) -> Kind {
        byte_search! {
            lexer: self,
            table: LINE_BREAK_TABLE,
            continue_if: |next_byte, pos| {
                // Match found. Decide whether to continue searching.
                // If this is end of comment, create trivia, and advance `pos` to after line break.
                // Do that here rather than in `handle_match`, to avoid branching twice on value of
                // the matched byte.
                #[allow(clippy::if_not_else)]
                if next_byte != LS_OR_PS_FIRST {
                    // `\r` or `\n`
                    self.trivia_builder
                        .add_single_line_comment(self.token.start, self.source.offset_of(pos));
                    // SAFETY: Safe to consume `\r` or `\n` as both are ASCII
                    unsafe { pos = pos.add(1) };
                    // We've found the end. Do not continue searching.
                    false
                } else {
                    // `0xE2`. Could be first byte of LS/PS, or could be some other Unicode char.
                    // Either way, Unicode is uncommon, so make this a cold branch.
                    cold_branch(|| {
                        // SAFETY: Next byte is `0xE2` which is always 1st byte of a 3-byte UTF-8 char.
                        // So safe to advance `pos` by 1 and read 2 bytes.
                        let next2 = unsafe { pos.add(1).read2() };
                        if next2 == LS_BYTES_2_AND_3 || next2 == PS_BYTES_2_AND_3 {
                            // Irregular line break
                            self.trivia_builder
                                .add_single_line_comment(self.token.start, self.source.offset_of(pos));
                            // Advance `pos` to after this char.
                            // SAFETY: `0xE2` is always 1st byte of a 3-byte UTF-8 char,
                            // so consuming 3 bytes will place `pos` on next UTF-8 char boundary.
                            unsafe { pos = pos.add(3) };
                            // We've found the end. Do not continue searching.
                            false
                        } else {
                            // Some other Unicode char beginning with `0xE2`.
                            // Skip 3 bytes (macro skips 1 already, so skip 2 here), and continue searching.
                            // SAFETY: `0xE2` is always 1st byte of a 3-byte UTF-8 char,
                            // so consuming 3 bytes will place `pos` on next UTF-8 char boundary.
                            unsafe { pos = pos.add(2) };
                            true
                        }
                    })
                }
            },
            handle_match: |_next_byte| {
                self.token.is_on_new_line = true;
                Kind::Skip
            },
            handle_eof: || {
                self.trivia_builder.add_single_line_comment(self.token.start, self.offset());
                Kind::Skip
            },
        };
    }

    /// Section 12.4 Multi Line Comment
    pub(super) fn skip_multi_line_comment(&mut self) -> Kind {
        // If `is_on_new_line` is already set, go directly to faster search which only looks for `*/`
        if self.token.is_on_new_line {
            return self.skip_multi_line_comment_after_line_break(self.source.position());
        }

        byte_search! {
            lexer: self,
            table: MULTILINE_COMMENT_START_TABLE,
            continue_if: |next_byte, pos| {
                // Match found. Decide whether to continue searching.
                if next_byte == b'*' {
                    if pos.addr() < self.source.end_addr() - 1 {
                        // If next byte isn't `/`, continue
                        // SAFETY: Have checked there's at least 1 further byte to read
                        if unsafe { pos.add(1).read() } == b'/' {
                            // Consume `*/`
                            // SAFETY: Consuming `*/` leaves `pos` on a UTF-8 char boundary
                            unsafe { pos = pos.add(2) };
                            false
                        } else {
                            true
                        }
                    } else {
                        // This is last byte in file. Continue to `handle_eof`.
                        // This is illegal in valid JS, so mark this branch cold.
                        cold_branch(|| true)
                    }
                } else if next_byte == LS_OR_PS_FIRST {
                    // `0xE2`. Could be first byte of LS/PS, or could be some other Unicode char.
                    // Either way, Unicode is uncommon, so make this a cold branch.
                    cold_branch(|| {
                        // SAFETY: Next byte is `0xE2` which is always 1st byte of a 3-byte UTF-8 char.
                        // So safe to advance `pos` by 1 and read 2 bytes.
                        let next2 = unsafe { pos.add(1).read2() };
                        if next2 == LS_BYTES_2_AND_3 || next2 == PS_BYTES_2_AND_3 {
                            // Irregular line break
                            self.token.is_on_new_line = true;
                            // Ideally we'd go on to `skip_multi_line_comment_after_line_break` here
                            // but can't do that easily because can't use `return` in a closure.
                            // But irregular line breaks are rare anyway.
                        }
                        // Either way, continue searching.
                        // Skip 3 bytes (macro skips 1 already, so skip 2 here), and continue searching.
                        // SAFETY: `0xE2` is always 1st byte of a 3-byte UTF-8 char,
                        // so consuming 3 bytes will place `pos` on next UTF-8 char boundary.
                        unsafe { pos = pos.add(2) };
                        true
                    })
                } else {
                    // Regular line break.
                    // No need to look for more line breaks, so switch to faster search just for `*/`.
                    self.token.is_on_new_line = true;
                    // SAFETY: Regular line breaks are ASCII, so skipping 1 byte is a UTF-8 char boundary.
                    let after_line_break = unsafe { pos.add(1) };
                    return self.skip_multi_line_comment_after_line_break(after_line_break);
                }
            },
            handle_match: |_next_byte| {
                self.trivia_builder.add_multi_line_comment(self.token.start, self.offset());
                Kind::Skip
            },
            handle_eof: || {
                self.error(diagnostics::UnterminatedMultiLineComment(self.unterminated_range()));
                Kind::Eof
            },
        };
    }

    fn skip_multi_line_comment_after_line_break(&mut self, pos: SourcePosition) -> Kind {
        // Can use `memchr` here as only searching for 1 pattern.
        // Cache `Finder` instance on `Lexer` as there's a significant cost to creating it.
        // `Finder::new` isn't a const function, so can't make it a `static`, and `lazy_static!`
        // has a cost each time it's deref-ed. Creating `Finder` unconditionally in `Lexer::new`
        // would be efficient for files containing multi-line comments, but would impose pointless
        // cost on files which don't. So this is the fastest solution.
        if self.multi_line_comment_end_finder.is_none() {
            self.multi_line_comment_end_finder = Some(Finder::new("*/"));
        }
        let finder = self.multi_line_comment_end_finder.as_ref().unwrap();

        let remaining = self.source.str_from_pos_to_end(pos).as_bytes();
        if let Some(index) = finder.find(remaining) {
            // SAFETY: `pos + index + 2` is end of `*/`, so a valid `SourcePosition`
            self.source.set_position(unsafe { pos.add(index + 2) });
            self.trivia_builder.add_multi_line_comment(self.token.start, self.offset());
            Kind::Skip
        } else {
            self.source.advance_to_end();
            self.error(diagnostics::UnterminatedMultiLineComment(self.unterminated_range()));
            Kind::Eof
        }
    }

    /// Section 12.5 Hashbang Comments
    pub(super) fn read_hashbang_comment(&mut self) -> Kind {
        while let Some(c) = self.next_char().as_ref() {
            if is_line_terminator(*c) {
                break;
            }
        }
        self.token.is_on_new_line = true;
        Kind::HashbangComment
    }
}