/// Copyright (c) Microsoft Corporation. All rights reserved. using System.Diagnostics.CodeAnalysis; // This file is used by Code Analysis to maintain SuppressMessage // attributes that are applied to this project. Project-level // suppressions either have no target or are given a specific target // and scoped to a namespace, type, member, etc. // // To add a suppression to this file, right-click the message in the // Error List, point to "Suppress Message(s)", and click "In Project // Suppression File". You do not need to add suppressions to this // file manually. // The below contains suppressions from LinkDemand occurring from calls to the Marshal type's methods. // Calls to these methods are absolute necessary to do successful VS integration. // All these methods are called from the VS Kernel, through interface calls that are expanded in the below methods. // Some of the below methods are non public but their caller's then are methods that are VS Integration interface implementations. // The methods in which the LinkDemands were suppressed should be revisited though if adding further LinkDemands or directly Demanding UnmanagedCode Permission is a better choice. //Interface parameters naming matching suppressions [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#AdviseHierarchyEvents(Microsoft.VisualStudio.Shell.Interop.IVsHierarchyEvents,System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#AdviseHierarchyEvents(Microsoft.VisualStudio.Shell.Interop.IVsHierarchyEvents,System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#AdviseBuildStatusCallback(Microsoft.VisualStudio.Shell.Interop.IVsBuildStatusCallback,System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#QueryStartBuild(System.UInt32,System.Int32[],System.Int32[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#QueryStartBuild(System.UInt32,System.Int32[],System.Int32[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#QueryStartClean(System.UInt32,System.Int32[],System.Int32[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#QueryStartUpToDateCheck(System.UInt32,System.Int32[],System.Int32[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#QueryStartClean(System.UInt32,System.Int32[],System.Int32[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#QueryStartUpToDateCheck(System.UInt32,System.Int32[],System.Int32[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#QueryStartUpToDateCheck(System.UInt32,System.Int32[],System.Int32[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#QueryStatus(System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#StartBuild(Microsoft.VisualStudio.Shell.Interop.IVsOutputWindowPane,System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#StartBuild(Microsoft.VisualStudio.Shell.Interop.IVsOutputWindowPane,System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#StartClean(Microsoft.VisualStudio.Shell.Interop.IVsOutputWindowPane,System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#UnadviseBuildStatusCallback(System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#Stop(System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#StartUpToDateCheck(Microsoft.VisualStudio.Shell.Interop.IVsOutputWindowPane,System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#StartUpToDateCheck(Microsoft.VisualStudio.Shell.Interop.IVsOutputWindowPane,System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#StartClean(Microsoft.VisualStudio.Shell.Interop.IVsOutputWindowPane,System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildDependency.#get_HelpContext(System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildDependency.#get_Description(System.String&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildDependency.#get_CanonicalName(System.String&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#Wait(System.UInt32,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildDependency.#get_MustUpdateBefore(System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildDependency.#get_HelpFile(System.String&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnAfterLoadProject(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsHierarchy)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnAfterOpeningChildren(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnAfterLoadProject(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsHierarchy)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnAfterClosingChildren(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnAfterOpenProject(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnAfterOpenProject(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnAfterRenameProject(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnBeforeCloseProject(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnBeforeCloseProject(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnBeforeClosingChildren(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnBeforeOpeningChildren(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnBeforeUnloadProject(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsHierarchy)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnBeforeUnloadProject(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsHierarchy)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnQueryChangeProjectParent(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnQueryChangeProjectParent(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnQueryChangeProjectParent(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnQueryCloseProject(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,System.Int32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnQueryCloseProject(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,System.Int32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnQueryCloseProject(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,System.Int32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnQueryCloseSolution(System.Object,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnQueryUnloadProject(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListenerForProjectOpen.#OnAfterOpenSolution(System.Object,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListenerForProjectOpen.#OnAfterOpenSolution(System.Object,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#OnActiveProjectCfgChange(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#OnAfterActiveSolutionCfgChange(Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsCfg)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#OnAfterActiveSolutionCfgChange(Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsCfg)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#OnBeforeActiveSolutionCfgChange(Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsCfg)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#OnBeforeActiveSolutionCfgChange(Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsCfg)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "3#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#UpdateProjectCfg_Begin(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsCfg,System.UInt32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "4#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#UpdateProjectCfg_Begin(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsCfg,System.UInt32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#UpdateProjectCfg_Begin(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsCfg,System.UInt32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#UpdateProjectCfg_Begin(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsCfg,System.UInt32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#UpdateProjectCfg_Begin(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsCfg,System.UInt32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "3#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#UpdateProjectCfg_Done(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsCfg,System.UInt32,System.Int32,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "5#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#UpdateProjectCfg_Done(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsCfg,System.UInt32,System.Int32,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#UpdateProjectCfg_Done(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsCfg,System.UInt32,System.Int32,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#UpdateProjectCfg_Done(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsCfg,System.UInt32,System.Int32,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#UpdateProjectCfg_Done(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsCfg,System.UInt32,System.Int32,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "4#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#UpdateProjectCfg_Done(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsCfg,System.UInt32,System.Int32,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#UpdateSolution_Begin(System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.UpdateSolutionEventsListener.#UpdateSolution_StartUpdate(System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#DeleteItem(System.UInt32,System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#DeleteItem(System.UInt32,System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#Exec(System.Guid&,System.UInt32,System.UInt32,System.IntPtr,System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#Exec(System.Guid&,System.UInt32,System.UInt32,System.IntPtr,System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#Exec(System.Guid&,System.UInt32,System.UInt32,System.IntPtr,System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#ExecCommand(System.UInt32,System.Guid&,System.UInt32,System.UInt32,System.IntPtr,System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#ExecCommand(System.UInt32,System.Guid&,System.UInt32,System.UInt32,System.IntPtr,System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "3#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#ExecCommand(System.UInt32,System.Guid&,System.UInt32,System.UInt32,System.IntPtr,System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#ExecCommand(System.UInt32,System.Guid&,System.UInt32,System.UInt32,System.IntPtr,System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "5#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#ExecCommand(System.UInt32,System.Guid&,System.UInt32,System.UInt32,System.IntPtr,System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "4#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#ExecCommand(System.UInt32,System.Guid&,System.UInt32,System.UInt32,System.IntPtr,System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetCanonicalName(System.UInt32,System.String&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetCanonicalName(System.UInt32,System.String&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetGuidProperty(System.UInt32,System.Int32,System.Guid&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetGuidProperty(System.UInt32,System.Int32,System.Guid&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetNestedHierarchy(System.UInt32,System.Guid&,System.IntPtr&,System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "3#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetNestedHierarchy(System.UInt32,System.Guid&,System.IntPtr&,System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetProperty(System.UInt32,System.Int32,System.Object&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetProperty(System.UInt32,System.Int32,System.Object&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetProperty(System.UInt32,System.Int32,System.Object&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetSite(Microsoft.VisualStudio.OLE.Interop.IServiceProvider&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#IgnoreItemFileChanges(System.UInt32,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#IgnoreItemFileChanges(System.UInt32,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#IsItemDirty(System.UInt32,System.IntPtr,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#IsItemDirty(System.UInt32,System.IntPtr,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#IsItemDirty(System.UInt32,System.IntPtr,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#IsItemReloadable(System.UInt32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#IsItemReloadable(System.UInt32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#OnBeforeDropNotify(Microsoft.VisualStudio.OLE.Interop.IDataObject,System.UInt32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#ParseCanonicalName(System.String,System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#ParseCanonicalName(System.String,System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#QueryClose(System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#QueryDeleteItem(System.UInt32,System.UInt32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#QueryDeleteItem(System.UInt32,System.UInt32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#QueryDeleteItem(System.UInt32,System.UInt32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#QueryStatus(System.Guid&,System.UInt32,Microsoft.VisualStudio.OLE.Interop.OLECMD[],System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "3#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#QueryStatusCommand(System.UInt32,System.Guid&,System.UInt32,Microsoft.VisualStudio.OLE.Interop.OLECMD[],System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#QueryStatusCommand(System.UInt32,System.Guid&,System.UInt32,Microsoft.VisualStudio.OLE.Interop.OLECMD[],System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#QueryStatusCommand(System.UInt32,System.Guid&,System.UInt32,Microsoft.VisualStudio.OLE.Interop.OLECMD[],System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#ReloadItem(System.UInt32,System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#ReloadItem(System.UInt32,System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "4#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#SaveItem(Microsoft.VisualStudio.Shell.Interop.VSSAVEFLAGS,System.String,System.UInt32,System.IntPtr,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "3#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#SaveItem(Microsoft.VisualStudio.Shell.Interop.VSSAVEFLAGS,System.String,System.UInt32,System.IntPtr,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#SaveItem(Microsoft.VisualStudio.Shell.Interop.VSSAVEFLAGS,System.String,System.UInt32,System.IntPtr,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#SaveItem(Microsoft.VisualStudio.Shell.Interop.VSSAVEFLAGS,System.String,System.UInt32,System.IntPtr,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#SetGuidProperty(System.UInt32,System.Int32,System.Guid&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#SetGuidProperty(System.UInt32,System.Int32,System.Guid&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#SetProperty(System.UInt32,System.Int32,System.Object)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#SetProperty(System.UInt32,System.Int32,System.Object)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#SetSite(Microsoft.VisualStudio.OLE.Interop.IServiceProvider)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#UnadviseHierarchyEvents(System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OANavigableProjectItems.#AddFolder(System.String,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OANavigableProjectItems.#AddFolder(System.String,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OANavigableProjectItems.#AddFromDirectory(System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OANavigableProjectItems.#AddFromFile(System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OANavigableProjectItems.#AddFromFileCopy(System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OANavigableProjectItems.#AddFromTemplate(System.String,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OANavigableProjectItems.#AddFromTemplate(System.String,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OAProjectItem`1.#Save(System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OAProjectItem`1.#SaveAs(System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#EnumOutputs(Microsoft.VisualStudio.Shell.Interop.IVsEnumOutputs&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#get_BuildableProjectCfg(Microsoft.VisualStudio.Shell.Interop.IVsBuildableProjectCfg&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#get_CanonicalName(System.String&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#get_DisplayName(System.String&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#get_IsDebugOnly(System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#get_IsPackaged(System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#get_IsReleaseOnly(System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#get_IsSpecifyingOutputSupported(System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#get_Platform(System.Guid&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#get_ProjectCfgProvider(Microsoft.VisualStudio.Shell.Interop.IVsProjectCfgProvider&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#get_RootURL(System.String&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#get_TargetCodePage(System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#get_UpdateSequenceNumber(Microsoft.VisualStudio.OLE.Interop.ULARGE_INTEGER[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#GetCfg(Microsoft.VisualStudio.Shell.Interop.IVsCfg&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#GetPages(Microsoft.VisualStudio.OLE.Interop.CAUUID[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#GetProjectDesignerPages(Microsoft.VisualStudio.OLE.Interop.CAUUID[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#GetProjectItem(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy&,System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#GetProjectItem(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy&,System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#OpenOutput(System.String,Microsoft.VisualStudio.Shell.Interop.IVsOutput&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#OpenOutput(System.String,Microsoft.VisualStudio.Shell.Interop.IVsOutput&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#QueryDebugLaunch(System.UInt32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#QueryDebugLaunch(System.UInt32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnAfterAsynchOpenProject(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnAfterAsynchOpenProject(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnAfterChangeProjectParent(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SolutionListener.#OnAfterCloseSolution(System.Object)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#AdviseBuildStatusCallback(Microsoft.VisualStudio.Shell.Interop.IVsBuildStatusCallback,System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildDependency.#get_ReferredProject(System.Object&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#QueryStartClean(System.UInt32,System.Int32[],System.Int32[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#QueryStartBuild(System.UInt32,System.Int32[],System.Int32[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#get_ProjectCfg(Microsoft.VisualStudio.Shell.Interop.IVsProjectCfg&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildDependency.#get_Type(System.Guid&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1701:ResourceStringCompoundWordsShouldBeCasedCorrectly", MessageId = "dataset", Scope = "resource", Target = "Microsoft.VisualStudio.Project.resources")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1703:ResourceStringsShouldBeSpelledCorrectly", MessageId = "Intelli", Scope = "resource", Target = "Microsoft.VisualStudio.Project.SecurityWarningDialog.resources")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.FileNode.#AfterSaveItemAs(System.IntPtr,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.NestedProjectNode.#IsItemDirty(System.UInt32,System.IntPtr,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.NestedProjectNode.#OnChanged(System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.NestedProjectNode.#OnRequestEdit(System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.NestedProjectNode.#SaveItem(Microsoft.VisualStudio.Shell.Interop.VSSAVEFLAGS,System.String,System.UInt32,System.IntPtr,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "4#", Scope = "member", Target = "Microsoft.VisualStudio.Project.NestedProjectNode.#SaveItem(Microsoft.VisualStudio.Shell.Interop.VSSAVEFLAGS,System.String,System.UInt32,System.IntPtr,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "3#", Scope = "member", Target = "Microsoft.VisualStudio.Project.NestedProjectNode.#SaveItem(Microsoft.VisualStudio.Shell.Interop.VSSAVEFLAGS,System.String,System.UInt32,System.IntPtr,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.NodeProperties.#GetCfgProvider(Microsoft.VisualStudio.Shell.Interop.IVsCfgProvider&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.NodeProperties.#GetPages(Microsoft.VisualStudio.OLE.Interop.CAUUID[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.NodeProperties.#GetProjectDesignerPages(Microsoft.VisualStudio.OLE.Interop.CAUUID[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.NodeProperties.#GetProjectItem(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy&,System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.NodeProperties.#GetProjectItem(Microsoft.VisualStudio.Shell.Interop.IVsHierarchy&,System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#OnBeforeDropNotify(Microsoft.VisualStudio.OLE.Interop.IDataObject,System.UInt32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#OnClear(System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#OnPaste(System.Int32,System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#OnPaste(System.Int32,System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#RegisterClipboardNotifications(System.Boolean)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SettingsPage.#GetPageInfo(Microsoft.VisualStudio.OLE.Interop.PROPPAGEINFO[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SettingsPage.#Help(System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SettingsPage.#Move(Microsoft.VisualStudio.OLE.Interop.RECT[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SettingsPage.#SetObjects(System.UInt32,System.Object[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SettingsPage.#SetObjects(System.UInt32,System.Object[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SettingsPage.#SetPageSite(Microsoft.VisualStudio.OLE.Interop.IPropertyPageSite)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SettingsPage.#Show(System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SettingsPage.#TranslateAccelerator(Microsoft.VisualStudio.OLE.Interop.MSG[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "4#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SingleFileGeneratorFactory.#CreateGeneratorInstance(System.String,System.Int32&,System.Int32&,System.Int32&,Microsoft.VisualStudio.Shell.Interop.IVsSingleFileGenerator&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SingleFileGeneratorFactory.#CreateGeneratorInstance(System.String,System.Int32&,System.Int32&,System.Int32&,Microsoft.VisualStudio.Shell.Interop.IVsSingleFileGenerator&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SingleFileGeneratorFactory.#CreateGeneratorInstance(System.String,System.Int32&,System.Int32&,System.Int32&,Microsoft.VisualStudio.Shell.Interop.IVsSingleFileGenerator&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SingleFileGeneratorFactory.#CreateGeneratorInstance(System.String,System.Int32&,System.Int32&,System.Int32&,Microsoft.VisualStudio.Shell.Interop.IVsSingleFileGenerator&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "3#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SingleFileGeneratorFactory.#CreateGeneratorInstance(System.String,System.Int32&,System.Int32&,System.Int32&,Microsoft.VisualStudio.Shell.Interop.IVsSingleFileGenerator&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SingleFileGeneratorFactory.#GetDefaultGenerator(System.String,System.String&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SingleFileGeneratorFactory.#GetDefaultGenerator(System.String,System.String&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SingleFileGeneratorFactory.#GetGeneratorInformation(System.String,System.Int32&,System.Int32&,System.Int32&,System.Guid&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SingleFileGeneratorFactory.#GetGeneratorInformation(System.String,System.Int32&,System.Int32&,System.Int32&,System.Guid&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "4#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SingleFileGeneratorFactory.#GetGeneratorInformation(System.String,System.Int32&,System.Int32&,System.Int32&,System.Guid&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SingleFileGeneratorFactory.#GetGeneratorInformation(System.String,System.Int32&,System.Int32&,System.Int32&,System.Guid&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "3#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SingleFileGeneratorFactory.#GetGeneratorInformation(System.String,System.Int32&,System.Int32&,System.Int32&,System.Guid&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.NestedProjectNode.#IsItemDirty(System.UInt32,System.IntPtr,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1725:ParameterNamesShouldMatchBaseDeclaration", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.SettingsPage.#Activate(System.IntPtr,Microsoft.VisualStudio.OLE.Interop.RECT[],System.Int32)")] //Ref arguments suppressions [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1045:DoNotPassTypesByReference", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.TokenProcessor.#ReplaceBetweenTokens(System.String&,Microsoft.VisualStudio.Project.ReplaceBetweenPairToken)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1045:DoNotPassTypesByReference", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.TokenProcessor.#ReplaceTokens(System.String&,Microsoft.VisualStudio.Project.ReplacePairToken)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1045:DoNotPassTypesByReference", MessageId = "3#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#QueryStatusOnNode(System.Guid,System.UInt32,System.IntPtr,Microsoft.VisualStudio.Project.QueryStatusResult&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1045:DoNotPassTypesByReference", MessageId = "3#", Scope = "member", Target = "Microsoft.VisualStudio.Project.DocumentManager.#OpenWithSpecific(System.UInt32,System.Guid&,System.String,System.Guid&,System.IntPtr,Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame&,Microsoft.VisualStudio.Project.WindowFrameShowAction)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1045:DoNotPassTypesByReference", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.FileDocumentManager.#Open(System.Boolean,System.Boolean,System.Guid&,System.IntPtr,Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame&,Microsoft.VisualStudio.Project.WindowFrameShowAction)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1045:DoNotPassTypesByReference", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.DocumentManager.#OpenWithSpecific(System.UInt32,System.Guid&,System.String,System.Guid&,System.IntPtr,Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame&,Microsoft.VisualStudio.Project.WindowFrameShowAction)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1045:DoNotPassTypesByReference", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.TokenProcessor.#DeleteTokens(System.String&,Microsoft.VisualStudio.Project.DeleteToken)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1045:DoNotPassTypesByReference", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.DocumentManager.#Open(System.Guid&,System.IntPtr,Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame&,Microsoft.VisualStudio.Project.WindowFrameShowAction)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1045:DoNotPassTypesByReference", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.DocumentManager.#CloseWindowFrame(Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1045:DoNotPassTypesByReference", MessageId = "4#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#Load(System.String,System.String,System.String,System.UInt32,System.Guid&,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1045:DoNotPassTypesByReference", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#SetGuidProperty(System.Int32,System.Guid&)")] //Out arguments suppressions [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1021:AvoidOutParameters", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.DocumentManager.#Open(System.Guid&,System.IntPtr,Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame&,Microsoft.VisualStudio.Project.WindowFrameShowAction)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1021:AvoidOutParameters", MessageId = "4#", Scope = "member", Target = "Microsoft.VisualStudio.Project.FileDocumentManager.#Open(System.Boolean,System.Boolean,System.Guid&,System.IntPtr,Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame&,Microsoft.VisualStudio.Project.WindowFrameShowAction)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1021:AvoidOutParameters", MessageId = "3#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#DisableCommandOnNodesThatDoNotSupportMultiSelection(System.Guid,System.UInt32,System.Collections.Generic.IList`1,System.Boolean&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1021:AvoidOutParameters", MessageId = "6#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#ExecCommandIndependentOfSelection(System.Guid,System.UInt32,System.UInt32,System.IntPtr,System.IntPtr,Microsoft.VisualStudio.Project.CommandOrigin,System.Boolean&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1021:AvoidOutParameters", MessageId = "7#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#ExecCommandThatDependsOnSelectedNodes(System.Guid,System.UInt32,System.UInt32,System.IntPtr,System.IntPtr,Microsoft.VisualStudio.Project.CommandOrigin,System.Collections.Generic.IList`1,System.Boolean&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1021:AvoidOutParameters", MessageId = "2#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#QueryStatusCommandFromOleCommandTarget(System.Guid,System.UInt32,System.Boolean&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1021:AvoidOutParameters", MessageId = "1#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetGuidProperty(System.Int32,System.Guid&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1021:AvoidOutParameters", MessageId = "5#", Scope = "member", Target = "Microsoft.VisualStudio.Project.DocumentManager.#OpenWithSpecific(System.UInt32,System.Guid&,System.String,System.Guid&,System.IntPtr,Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame&,Microsoft.VisualStudio.Project.WindowFrameShowAction)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1021:AvoidOutParameters", MessageId = "3#", Scope = "member", Target = "Microsoft.VisualStudio.Project.FileDocumentManager.#Open(System.Boolean,System.Boolean,System.Guid,Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame&,Microsoft.VisualStudio.Project.WindowFrameShowAction)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1021:AvoidOutParameters", MessageId = "0#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ReferenceNode.#CanAddReference(Microsoft.VisualStudio.Project.ReferenceNode+CannotAddReferenceErrorMessage&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1021:AvoidOutParameters", MessageId = "5#", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#Load(System.String,System.String,System.String,System.UInt32,System.Guid&,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1021:AvoidOutParameters", MessageId = "7#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#ExecCommandThatDependsOnSelectedNodes(System.Guid,System.UInt32,System.UInt32,System.IntPtr,System.IntPtr,Microsoft.VisualStudio.Project.CommandOrigin,System.Collections.Generic.IList`1,System.Boolean&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1021:AvoidOutParameters", MessageId = "3#", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#DisableCommandOnNodesThatDoNotSupportMultiSelection(System.Guid,System.UInt32,System.Collections.Generic.IList`1,System.Boolean&)")] //Default constructors for COM suppressions [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.AssemblyReferenceNode")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.ComReferenceNode")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.ConfigProvider")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.ConnectionPointContainer")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.DependentFileNode")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.DependentFileNodeProperties")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.FileNode")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.FileNodeProperties")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.FolderNode")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.FolderNodeProperties")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.HierarchyNode")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.NestedProjectNode")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.NodeProperties")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAAssemblyReference")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAComReference")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAFileItem")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAFolderItem")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OANavigableProjectItems")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OANestedProjectItem")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OANullProperty")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAProject")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAProjectItems")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAProjectReference")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAProperties")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAProperty")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAReferenceFolderItem")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAReferenceItem")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAReferences")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAVSProject")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAVSProjectEvents")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.OutputGroup")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.ProjectConfig")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.ProjectConfigProperties")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.ProjectContainerNode")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.ProjectNode")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.ProjectNodeProperties")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.ProjectPackage")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.ProjectReferenceNode")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.ProjectReferencesProperties")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.ReferenceContainerNode")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.ReferenceNode")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.ReferenceNodeProperties")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.SettingsPage")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.SingleFileGeneratorNodeProperties")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1409:ComVisibleTypesShouldBeCreatable", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAVSProjectItem")] //PInvoke suppressions [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1414:MarkBooleanPInvokeArgumentsWithMarshalAs", Scope = "member", Target = "Microsoft.VisualStudio.Project.NativeMethods.#DestroyIcon(System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1414:MarkBooleanPInvokeArgumentsWithMarshalAs", Scope = "member", Target = "Microsoft.VisualStudio.Project.NativeMethods.#GetBinaryType(System.String,System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1414:MarkBooleanPInvokeArgumentsWithMarshalAs", Scope = "member", Target = "Microsoft.VisualStudio.Project.UnsafeNativeMethods.#GlobalUnlock(System.Runtime.InteropServices.HandleRef)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1414:MarkBooleanPInvokeArgumentsWithMarshalAs", Scope = "member", Target = "Microsoft.VisualStudio.Project.UnsafeNativeMethods.#GlobalUnLock(System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1414:MarkBooleanPInvokeArgumentsWithMarshalAs", Scope = "member", Target = "Microsoft.VisualStudio.Project.UnsafeNativeMethods.#ImageList_Draw(System.Runtime.InteropServices.HandleRef,System.Int32,System.Runtime.InteropServices.HandleRef,System.Int32,System.Int32,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1414:MarkBooleanPInvokeArgumentsWithMarshalAs", Scope = "member", Target = "Microsoft.VisualStudio.Project.UnsafeNativeMethods.#SHGetPathFromIDList(System.IntPtr,System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Interoperability", "CA1414:MarkBooleanPInvokeArgumentsWithMarshalAs", Scope = "member", Target = "Microsoft.VisualStudio.Project.NativeMethods.#IsDialogMessageA(System.IntPtr,Microsoft.VisualStudio.OLE.Interop.MSG&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Portability", "CA1901:PInvokeDeclarationsShouldBePortable", MessageId = "return", Scope = "member", Target = "Microsoft.VisualStudio.Project.UnsafeNativeMethods.#RegisterClipboardFormat(System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Portability", "CA1901:PInvokeDeclarationsShouldBePortable", MessageId = "return", Scope = "member", Target = "Microsoft.VisualStudio.Project.UnsafeNativeMethods.#GlobalSize(System.IntPtr)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Portability", "CA1901:PInvokeDeclarationsShouldBePortable", MessageId = "return", Scope = "member", Target = "Microsoft.VisualStudio.Project.UnsafeNativeMethods.#GlobalSize(System.Runtime.InteropServices.HandleRef)")] //'Flags' naming suppressions [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "Flags", Scope = "type", Target = "Microsoft.VisualStudio.Project.ModuleKindFlags")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "Flags", Scope = "member", Target = "Microsoft.VisualStudio.Project.NestedProjectNode.#VirtualProjectFlags")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "Flags", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetQueryRemoveFileFlags(System.String[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "Flags", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetQueryAddFileFlags(System.String[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "Flags", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetAddFileFlags(System.String[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "flags", Scope = "member", Target = "Microsoft.VisualStudio.Project.Utilities.#CreateCADWORD(System.Collections.Generic.IList`1)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "flags", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#Load(System.String,System.String,System.String,System.UInt32,System.Guid&,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "Flags", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectContainerNode.#AddNestedProjectFromTemplate(System.String,System.String,System.String,Microsoft.VisualStudio.Project.ProjectElement,Microsoft.VisualStudio.Shell.Interop.__VSCREATEPROJFLAGS)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "Flags", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectContainerNode.#AddNestedProjectFromTemplate(Microsoft.VisualStudio.Project.ProjectElement,Microsoft.VisualStudio.Shell.Interop.__VSCREATEPROJFLAGS)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "Flags", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectContainerNode.#AddExistingNestedProject(Microsoft.VisualStudio.Project.ProjectElement,Microsoft.VisualStudio.Shell.Interop.__VSCREATEPROJFLAGS)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "Flags", Scope = "member", Target = "Microsoft.VisualStudio.Project.NestedProjectNode.#Init(System.String,System.String,System.String,Microsoft.VisualStudio.Shell.Interop.__VSCREATEPROJFLAGS)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "flags", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#OnPropertyChanged(Microsoft.VisualStudio.Project.HierarchyNode,System.Int32,System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "Flag", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#IgnoreItemFileChanges(System.Boolean)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "flags", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetSccSpecialFiles(System.String,System.Collections.Generic.IList`1,System.Collections.Generic.IList`1)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "flags", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetSccFiles(System.Collections.Generic.IList`1,System.Collections.Generic.IList`1)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "Flags", Scope = "member", Target = "Microsoft.VisualStudio.Project.DocumentManager.#OpenWithSpecific(System.UInt32,System.Guid&,System.String,System.Guid&,System.IntPtr,Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame&,Microsoft.VisualStudio.Project.WindowFrameShowAction)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "Flag", Scope = "member", Target = "Microsoft.VisualStudio.Project.DocumentManager.#Close(Microsoft.VisualStudio.Shell.Interop.__FRAMECLOSE)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1726:UsePreferredTerms", MessageId = "Flags", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetRemoveFileFlags(System.String[])")] //Properties instead of methods suppressions [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.DocumentManager.#GetFullPathForDocument()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.DocumentManager.#GetOwnerCaption()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetAutomationObject()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetDocumentManager()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetDragTargetHandlerNode()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetEditLabel()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetMkDocument()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetRelationalName()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetRelationNameExtension()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.IReferenceContainerProvider.#GetReferenceContainer()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OANavigableProjectItems.#GetListOfProjectItems()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectElement.#GetFullPathForElement()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#GetCompiler()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#GetInner()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#GetOutputGroupNames()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectOptions.#GetOptionHelp()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1024:UsePropertiesWhereAppropriate", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#GetSelectedNodes()")] //Generic nesting suppressions [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1031:DoNotCatchGeneralExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.BuildableProjectConfig.#Build(System.UInt32,Microsoft.VisualStudio.Shell.Interop.IVsOutputWindowPane,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1006:DoNotNestGenericTypesInMemberSignatures", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#GetOutputGroupNames()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1006:DoNotNestGenericTypesInMemberSignatures", Scope = "member", Target = "Microsoft.VisualStudio.Project.ConfigProvider.#NewConfigProperties")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1004:GenericMethodsShouldProvideTypeParameter", Scope = "member", Target = "Microsoft.VisualStudio.Project.Utilities.#ConvertFromType`1(System.String,System.Globalization.CultureInfo)")] //Methods that swallows exceptions suppressions [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1031:DoNotCatchGeneralExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.Web.CodeBehindCodeGenerator.#GetDesignerItem(Microsoft.VisualStudio.Project.Web.VsHierarchyItem,System.Boolean)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1031:DoNotCatchGeneralExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.Web.CodeBehindCodeGenerator.#FindClass(Microsoft.VisualStudio.Project.Web.VsHierarchyItem,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1031:DoNotCatchGeneralExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.Web.CodeBehindCodeGenerator.#DisposeGenerateState()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1031:DoNotCatchGeneralExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.Web.CodeBehindCodeGenerator.#GetFieldNames(EnvDTE.CodeClass,System.Boolean,System.Boolean,System.Int32,System.Int32,Microsoft.VisualStudio.Project.Web.FieldDataDictionary&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1031:DoNotCatchGeneralExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.Web.CodeBehindCodeGenerator.#GetFieldNames(System.String[],System.Boolean)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1031:DoNotCatchGeneralExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#Close()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1031:DoNotCatchGeneralExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.NativeMethods+ConnectionPointCookie.#.ctor(System.Object,System.Object,System.Type,System.Boolean)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1031:DoNotCatchGeneralExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.NativeMethods+DataStreamFromComStream.#Flush()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1031:DoNotCatchGeneralExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.Web.VsHierarchyItem.#FullPath()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1031:DoNotCatchGeneralExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.Web.VsHierarchyItem.#GetGuidPropHelper(Microsoft.VisualStudio.Shell.Interop.__VSHPROPID)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1031:DoNotCatchGeneralExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.Web.VsHierarchyItem.#GetPropHelper(System.UInt32,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1031:DoNotCatchGeneralExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.Web.VsHierarchyItem.#GetService`1()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1031:DoNotCatchGeneralExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.Web.WAUtilities.#CreateInstance`1(System.IServiceProvider,System.Guid)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1031:DoNotCatchGeneralExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.Web.WAUtilities.#GetService`1(System.IServiceProvider)")] //Local variables names matching instance variable names suppressions [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "dropDataType", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#PasteFromClipboard(Microsoft.VisualStudio.Project.HierarchyNode)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "dropDataType", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#Drop(Microsoft.VisualStudio.OLE.Interop.IDataObject,System.UInt32,System.UInt32,System.UInt32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "dropDataType", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#ProcessSelectionDataObject(Microsoft.VisualStudio.OLE.Interop.IDataObject,Microsoft.VisualStudio.Project.HierarchyNode)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "filename", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#InitializeForOuter(System.String,System.String,System.String,System.UInt32,System.Guid&,System.IntPtr&,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "filename", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#SaveCompleted(System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "isDirty", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#IsDirty(System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "isDirty", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#CleanupSelectionDataObject(System.Boolean,System.Boolean,System.Boolean,System.Boolean)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "isDirty", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#IsFlavorDirty()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "isDirty", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#OnBeforeDropNotify(Microsoft.VisualStudio.OLE.Interop.IDataObject,System.UInt32,System.Int32&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "name", Scope = "member", Target = "Microsoft.VisualStudio.Project.SettingsPage.#GetTypedConfigProperty(System.String,System.Type)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "name", Scope = "member", Target = "Microsoft.VisualStudio.Project.SettingsPage.#GetTypedProperty(System.String,System.Type)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "name", Scope = "member", Target = "Microsoft.VisualStudio.Project.SettingsPage.#SetConfigProperty(System.String,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "options", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#SetTargetPlatform(Microsoft.VisualStudio.Project.ProjectOptions)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "options", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#GetOutputAssembly(System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "options", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#GetProjectOptions(System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "options", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#PrepareBuild(System.String,System.Boolean)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "options", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#SetBuildConfigurationProperties(System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "project", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#CreateOutputGroup(Microsoft.VisualStudio.Project.ProjectNode,System.Collections.Generic.KeyValuePair`2)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "projectName", Scope = "member", Target = "Microsoft.VisualStudio.Project.NestedProjectNode.#Init(System.String,System.String,System.String,Microsoft.VisualStudio.Shell.Interop.__VSCREATEPROJFLAGS)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "sccAuxPath", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#SetSccLocation(System.String,System.String,System.String,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "sccAuxPath", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#SetSccSettings(System.String,System.String,System.String,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "sccLocalPath", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#SetSccLocation(System.String,System.String,System.String,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "sccLocalPath", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#SetSccSettings(System.String,System.String,System.String,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "sccProjectName", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#SetSccLocation(System.String,System.String,System.String,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "sccProjectName", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#SetSccSettings(System.String,System.String,System.String,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "sccProvider", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#SetSccLocation(System.String,System.String,System.String,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "sccProvider", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#SetSccSettings(System.String,System.String,System.String,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "site", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#SetSite(Microsoft.VisualStudio.OLE.Interop.IServiceProvider)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "dropDataType", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#QueryDropEffect(Microsoft.VisualStudio.Project.DropDataType,System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "i", Scope = "member", Target = "Microsoft.VisualStudio.Project.EnumSTATDATA.#Microsoft.VisualStudio.OLE.Interop.IEnumSTATDATA.Skip(System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Maintainability", "CA1500:VariableNamesShouldNotMatchFieldNames", MessageId = "i", Scope = "member", Target = "Microsoft.VisualStudio.Project.EnumSTATDATA.#Microsoft.VisualStudio.OLE.Interop.IEnumSTATDATA.Next(System.UInt32,Microsoft.VisualStudio.OLE.Interop.STATDATA[],System.UInt32&)")] //COM Exceptions suppressions [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1065:DoNotRaiseExceptionsInUnexpectedLocations", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OAReferenceBase`1.#ExtenderCATID")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1065:DoNotRaiseExceptionsInUnexpectedLocations", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OAReferenceBase`1.#Culture")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1065:DoNotRaiseExceptionsInUnexpectedLocations", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OAReferenceBase`1.#ExtenderNames")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1065:DoNotRaiseExceptionsInUnexpectedLocations", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OAReferenceBase`1.#Identity")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1065:DoNotRaiseExceptionsInUnexpectedLocations", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OAReferenceBase`1.#Name")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1065:DoNotRaiseExceptionsInUnexpectedLocations", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OAReferenceBase`1.#PublicKeyToken")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1065:DoNotRaiseExceptionsInUnexpectedLocations", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OAReferenceBase`1.#Type")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1065:DoNotRaiseExceptionsInUnexpectedLocations", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OASolutionFolder`1.#Parent")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1065:DoNotRaiseExceptionsInUnexpectedLocations", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OAProjectItem`1.#Collection")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1065:DoNotRaiseExceptionsInUnexpectedLocations", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OAProjectItem`1.#IsDirty")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1065:DoNotRaiseExceptionsInUnexpectedLocations", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OAReferenceBase`1.#CopyLocal")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Usage", "CA2201:DoNotRaiseReservedExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.DataObject.#Microsoft.VisualStudio.OLE.Interop.IDataObject.GetCanonicalFormatEtc(Microsoft.VisualStudio.OLE.Interop.FORMATETC[],Microsoft.VisualStudio.OLE.Interop.FORMATETC[])")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Usage", "CA2201:DoNotRaiseReservedExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#.ctor(Microsoft.VisualStudio.Project.ProjectNode,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Usage", "CA2201:DoNotRaiseReservedExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectContainerNode.#RunVsTemplateWizard(Microsoft.VisualStudio.Project.ProjectElement,System.Boolean)")] //IEnumerable implementation suppressions [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1010:CollectionsShouldImplementGenericInterface", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAReferences")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1010:CollectionsShouldImplementGenericInterface", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAProperties")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1010:CollectionsShouldImplementGenericInterface", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OANavigableProjectItems")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1010:CollectionsShouldImplementGenericInterface", Scope = "type", Target = "Microsoft.VisualStudio.Project.Automation.OAProjectItems")] //Other suppressions [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1034:NestedTypesShouldNotBeVisible", Scope = "type", Target = "Microsoft.VisualStudio.Project.ProjectNode+ImageName")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Performance", "CA1804:RemoveUnusedLocals", MessageId = "trailer", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetProperty(System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Performance", "CA1804:RemoveUnusedLocals", MessageId = "vspropId", Scope = "member", Target = "Microsoft.VisualStudio.Project.HierarchyNode.#GetGuidProperty(System.UInt32,System.Int32,System.Guid&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Performance", "CA1805:DoNotInitializeUnnecessarily", Scope = "member", Target = "Microsoft.VisualStudio.Project.NativeMethods+ConnectionPointCookie.#.ctor(System.Object,System.Object,System.Type,System.Boolean)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1033:InterfaceMethodsShouldBeCallableByChildTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ConnectionPointContainer.#Microsoft.VisualStudio.OLE.Interop.IConnectionPointContainer.FindConnectionPoint(System.Guid&,Microsoft.VisualStudio.OLE.Interop.IConnectionPoint&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1033:InterfaceMethodsShouldBeCallableByChildTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.NodeProperties.#EnvDTE80.IInternalExtenderProvider.CanExtend(System.String,System.String,System.Object)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1033:InterfaceMethodsShouldBeCallableByChildTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.NodeProperties.#EnvDTE80.IInternalExtenderProvider.GetExtender(System.String,System.String,System.Object,EnvDTE.IExtenderSite,System.Int32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1033:InterfaceMethodsShouldBeCallableByChildTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.NodeProperties.#EnvDTE80.IInternalExtenderProvider.GetExtenderNames(System.String,System.Object)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1033:InterfaceMethodsShouldBeCallableByChildTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#Microsoft.VisualStudio.Shell.Interop.IVsProjectFlavorCfg.Close()")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1033:InterfaceMethodsShouldBeCallableByChildTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#VisualStudio.Project.IProjectEventsProvider.ProjectEventsProvider")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1033:InterfaceMethodsShouldBeCallableByChildTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#Microsoft.VisualStudio.Shell.Interop.IVsBuildPropertyStorage.GetItemAttribute(System.UInt32,System.String,System.String&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1033:InterfaceMethodsShouldBeCallableByChildTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#Microsoft.VisualStudio.Shell.Interop.IVsBuildPropertyStorage.GetPropertyValue(System.String,System.String,System.UInt32,System.String&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1033:InterfaceMethodsShouldBeCallableByChildTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#Microsoft.VisualStudio.Shell.Interop.IVsBuildPropertyStorage.RemoveProperty(System.String,System.String,System.UInt32)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1033:InterfaceMethodsShouldBeCallableByChildTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#Microsoft.VisualStudio.Shell.Interop.IVsBuildPropertyStorage.SetItemAttribute(System.UInt32,System.String,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1033:InterfaceMethodsShouldBeCallableByChildTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#Microsoft.VisualStudio.Shell.Interop.IVsBuildPropertyStorage.SetPropertyValue(System.String,System.String,System.UInt32,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1033:InterfaceMethodsShouldBeCallableByChildTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#Microsoft.VisualStudio.Shell.Interop.IVsProjectFlavorCfgProvider.CreateProjectFlavorCfg(Microsoft.VisualStudio.Shell.Interop.IVsCfg,Microsoft.VisualStudio.Shell.Interop.IVsProjectFlavorCfg&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1033:InterfaceMethodsShouldBeCallableByChildTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ConnectionPointContainer.#Microsoft.VisualStudio.OLE.Interop.IConnectionPointContainer.EnumConnectionPoints(Microsoft.VisualStudio.OLE.Interop.IEnumConnectionPoints&)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1033:InterfaceMethodsShouldBeCallableByChildTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#Microsoft.VisualStudio.Project.IProjectEventsProvider.ProjectEventsProvider")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Usage", "CA2201:DoNotRaiseReservedExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#GetMsBuildProperty(System.String,System.Boolean)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Usage", "CA2201:DoNotRaiseReservedExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#AddNodeIfTargetExistInStorage(Microsoft.VisualStudio.Project.HierarchyNode,System.String,System.String)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Usage", "CA2201:DoNotRaiseReservedExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectNode.#AddFolderFromOtherProject(System.String,Microsoft.VisualStudio.Project.HierarchyNode)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Usage", "CA2201:DoNotRaiseReservedExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectElement.#GetMetadataAndThrow(System.String,System.Exception)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Usage", "CA2201:DoNotRaiseReservedExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectContainerNode.#GetRegisteredProject(Microsoft.VisualStudio.Project.ProjectElement)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Usage", "CA2201:DoNotRaiseReservedExceptionTypes", Scope = "member", Target = "Microsoft.VisualStudio.Project.ProjectConfig.#GetMsBuildProperty(System.String,System.Boolean)")] [assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1065:DoNotRaiseExceptionsInUnexpectedLocations", Scope = "member", Target = "Microsoft.VisualStudio.Project.Automation.OAVSProject.#Imports")]